Hydrocyclone Filter

Applications

Hydrocyclone Filters are used in micro irrigation systems to remove sand and silt particles from irrigation water.

Features and Specifications

  • Mild steel construction.
  • Coated with more than 70 micron thick deep blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects.
  • Hydrodynamically designed to create maximum centrifugal action to separate particles heavier than water
  • Efficiently removes fine sand and silt particles of size higher than 75 microns and specific gravity more than 2.65.
  • Special protection plate are provided at the bottom of the cone to prevent wearing.
  • Large volume of dirt collection chamber increases flushing interval.
  • Dirt can be easily flushed out through dirt collection chamber.
  • Available in maximum operating pressure of 10 kg/cm² (142 psi).
  • Standard end connections are BSP flanged. Please specify for other end connections. (ANSI flanged or Easy-Fix™).
  • Recommended to install before media/screen filters to remove particles heavier than water.
  • Improves operational efficiency & life of media / screen filters.
  • Can also be supplied in stainless steel as a special order.
  • Can be supplied in higher flow capacities in multiple batteries option.

Nominal Flow
Rate

Inlet / Outlet
Connection

A

B

C

D

E

Vol. of Collection
Chamber

Gross Weight

m³/hr

gpm

inch

mm

mm

mm

mm

mm

ltrs.

kg.

lbs.

25

110

2″

1065

865

204

198

460

5

36

79.2

40

176

2½”

1365

1112

264

258

520

10

48

105.6

50

220

3″

1575

1350

323

317

520

10

60

132.0

80

352

4″

1950

1745

402

396

500

49

89

195.8

120

528

6″

2850

2275

600

594

500

78

151

332.2

* For detailed code please refer the ordering specifications.