You are here >Home>product>Ventury

Ventury

Now-a-days by using drip irrigation system, farmers ate producing variery of crops not only of grapes, banana, sugarcane, pomegranate but also of flowers, For this, traditional fertilizer methods are used. In same Places Fertilizer soluble in water are used. For this purpose they use fertilizers tanks or H.T.P. Pumps. Elsewhere fertilizers are supplied by foot pumps also or pumps of 0.5 HP are used

The base for water soluble fertilizers is acid. Hence, all the above equipments become useless by corrossion. For this purpose, a new production called Drip’n’ Drip  Injector has been introduced. Using this injector, we can supply uniform quantity of fertilizers in the entire field. Hence, it is very essential to install Drip ‘n’ Drip  Injector

The best quality of Drip ‘n’ Drip[  Injector is that it doesnot require any external power. it works in an existing pressure of pumps.

It is also available in number of kinds suitable to you.

Advantages of Drip ‘ n’ Drip  Ventury (Merits)

Safety from sunlight or heat : An Drip ‘n Drip  Injector has been manufactured by using high quality raw materials and also by using high stndard ultra-voiles materials, it is safe from sun heat. It also helps to increase its life.

Rust proof : It is safe to use Drip ‘n ‘Drip  Fertilizer Injector Because water and chemicals donot affect it. Ad it is rustproof, it doesnot get correded. Therefore we need not replace it every now and then.

Chemical Resistance :Chemicals like acids and bases donot make any adverse effect on it. So it lasts for years together. The cost of maintainance and repairs is very low. It is also more durable and strong hence no necessity of replacing it or repairing it and no maintenance is required.

Working Method

Drip ‘n’ Drip  Fertilizers Injector works on pressure loss opetation system. Hence it cannot work unless 0.5 kg pressure is reduced for 2″OM Fertilizer and 0.3 kg loss for the 1.5″ OM Fertilizer Injector.

10000 lit. water is flown per hour with 2″ injector. Hance it should be used where water available more than 10000 lit. per hour.

Before using Drip ‘n ‘Drip  Fertilizer Injector cleanliness of Sand filter and screen filter is necessary. OM Fertilizer Injector cannot work if is choked up.

For installing Drip ‘n ‘Drip  Fertilizer Injector the area of field should be even. If the field area is very high, then filter and injector can not be installed in lower area. In such a case Drip ‘n ‘Drip  Fertilizer Injector should be installed or irrigation point.

Which installing Drip ‘n ‘Drip  Fertilizer Injector the arrow (→) should be adjested in the direction of the flow of water.

We can install Drip ‘n ‘Drip  Fertilizer Injector on pipe lines of 4″, 3″, 2.5″ or 1.2″ measures.
(See the Picture) Use a reduction ‘T’ in which there is a ball valve of that capacity in the middle.

After installing Drip ‘n ‘Drip  Fertilizer Injector start the drip irrigation for 15 to 20 minutes. After exhaustion of air pressure in water, Drip ‘n ‘Drip  Fertilizer Injector should be started.

Ensure that succession pipe is tightly fitted on hose nipple, otherwise liquid fertilizer cannot be succeed.

We can install OM Fertilizer Injector in any position viz. Vertical( | ), Horezontal( — ), inclined( ⁄ ) etc.

¾” Venturi Injector

2″ Venturi Injector

Inlet Pressure Kg/cm2

Outlet Pressure Kg/cm2

Q Inj Motive Flow L/H

Q asp Water Suction L/H

Inlet Pressure Kg/cm2

Outlet Pressure Kg/cm2

Q Inj Motive Flow L/H

Q asp Water Suction L/H

0.5

0.0

576

150

1.0

0.5

5820

910

1.0

0.5

828

78

1.5

1.0

6750

660

1.5

1.0

1056

42

2.0

1.5

7540

400

2.0

1.5

1212

24

2.5

2.0

8280

200